The short answer on outdoor softeners
Most softener manufacturers design their units for indoor use or for sheltered spaces. Outside, a softener faces three threats: freezing, direct sun and weather. Freezing can crack the resin tank, valve and brine tank. Sun can degrade plastic parts and warm the unit beyond its rated range. Rain and debris can foul the controls and brine.
Some models are rated for outdoor use, and some owners build an insulated, ventilated enclosure. If you must put one outside, check the manufacturer's temperature range, protect the plumbing from freezing and keep the electrical connection weatherproof. Garages, basements and utility rooms are better homes.
Where a softener can go
| Location | Fit | Concern |
|---|---|---|
| Heated utility room | Best | Needs a floor drain or drain line |
| Garage | Good | Freeze risk in a hard cold snap |
| Crawlspace or basement | Possible | Access, drain and brine tank space |
| Outdoor enclosure | Only with protection | Freezing, sun and weather |
A softener is only part of a water treatment plan. If you want to talk about the options, see our plumbing installation page.
If you consider an outdoor install
- Confirm the model is rated for outdoor use and check the temperature range.
- Protect pipes and valves from freezing with insulation and a heated enclosure if needed.
- Shade the unit and keep the brine tank dry.
- Provide a drain for regeneration water that meets local rules.
- Use a weatherproof outlet and a bypass valve for service.
Do you need a softener in Lake Stevens at all?
Snohomish County PUD lists total hardness for the Lake Stevens water system between 9 and 89 ppm, with an average of 73 ppm. That is roughly 4.3 grains per gallon on average, which many water quality scales rate as moderately soft to slightly hard. Many households in that range see little scale and choose not to soften.
Test before you buy. A simple hardness test strip from a hardware store shows where your tap falls. If you see white buildup on fixtures, spotty dishes or scale in the water heater, the number may be higher at your address than the average. You can also ask the PUD for its latest water quality report at 425-397-3000.
Local rules and conditions
Water softeners discharge brine during regeneration. Ask the Lake Stevens Sewer District how it handles softener discharge before you connect a drain, and do not send brine to a septic system or a storm drain without checking the rules.
Washington's state plumbing code, WAC 51-56, adopts the Uniform Plumbing Code (UPC) with state amendments, and a softener installation involves plumbing that may need a permit. Ask the City of Lake Stevens building department.
Lake Stevens grew from 6,361 residents in 2000 to 28,069 in 2010. Newer homes often have a plumbed-in loop or a spot for a softener near the water heater. Check the garage or utility area for a bypass tee or extra stub.
Not sure you need a softener? Call and talk through your water and your options.
Call (360) 371-6092What a test result tells you
A hardness test gives you a number, and the number tells you what to do next. Under about 3 grains per gallon, most households see little effect. Between 3 and 7, some see spotting and light scale and many get by with simple maintenance. Above 7 grains, scale is more likely and a softener starts to look worth it. Your tap may differ from the PUD system average, so test at your own faucet.
A test also shows if you have other issues. Iron staining, a sulfur smell or cloudy water are not hardness problems, and a softener may not solve them. A lab test or a conversation with a water treatment specialist helps sort them out before you buy equipment.
If you decide a softener makes sense, size it from your actual hardness and your household water use rather than from a sales brochure. An oversized unit wastes salt and water, and an undersized one runs out of capacity between regenerations.
Alternatives to an outdoor softener
If your hardness is modest, you can manage scale without a softener. Flush the water heater yearly, clean aerators and showerheads and use a descaler on fixtures. Some homeowners add a point-of-use filter at the kitchen sink for taste.
If scale in the water heater is a concern, see our water heater repair page. We also work around Marysville and nearby towns. See our Marysville emergency plumber page and the service area page.
Questions we hear
Can a water softener be installed outside?
Only if the model is rated for it and protected from freezing, sun and weather. Indoor spots are safer.
How hard is Lake Stevens water?
Snohomish County PUD lists total hardness between 9 and 89 ppm, averaging 73 ppm, which is about 4.3 grains per gallon.
Do I need a softener with 73 ppm hardness?
Many households do not. Test your tap and look for scale before buying.
Where does softener brine go?
To a drain approved by local rules. Ask the Lake Stevens Sewer District or your septic provider.
Who do I ask about my water quality?
Call Snohomish County PUD at 425-397-3000.
Want help placing or sizing a softener? Call and ask.
Call (360) 371-6092
